Products
Semi Industrial Valves
Cast Iron Wheel Valves
We offer an extensive range of Cast Iron Wheel Valves Flanged having sturdy construction. These are operated using hand wheel. Our range is quality tested by our quality inspectors to offer a fault-free range. Owing to the latest machines and tools, we have been able to offer technologically advanced range.
Wheel Valve Screwed
Design :
Cast Iron Wheel (Globe) Valve No.5 BSP Screwed Female Ends available in
Bronze renewable seat and Forged Brass stem.
S.S renewable seat and stem.
Cast Iron Wheel (Globe) Valve No.4 BSP Screwed Female Ends available in:
PTFE seat and Forged Brass stem (from 20 mm to 32 mm)
Forged Brass seat and stem. (15mm, 40mm & 50mm)
Range :
Wheel Valve No. 5 - 8mm to 100mm.
Wheel Valve No. 4 - 15mm to 50mm.
Wheel Valve Flanged
Design :
Cast Iron Wheel (Globe) Valve Flanged Ends (Undrilled) matched to IS:778-1984-Class-II Available in Bronze renewable seat and Forged Brass stem. (Valves with Drilled Flanges may be supplied on demand)
Range :
15mm to 100mm.
Operation :
Hand wheel operated.
Marking :
One side of body "ALTO No.-4" / "ALTO No.-5". Other side of body "Tested", "Size" & "Arrow".
Utility :
Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations.
Temp Range :
10° C to 200° C
Testing :
Hydraulically
Gun Metal Wheel Valves
Non-Rising Stem, Screwed, IS : 778 Class-1 (ISI Marked)
Product Description
Product Standard : IS-778
Pressure/Class/Rating : Class-1
Body Material cum Standard : GM (IS:318 Gr.LTB2)
Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem
Type of Seat : Integral seat
Type of Wedge : Solid wedge
Trim : Cu-Alloy
Gland Packing : Asbestos/Hemp & Jute
End Details : Screwed female threads to IS:554 Parallel
Testing & Certification
Body Test Pressure : 1.5 MPa Hyd.
Seat & Back Seat Test Pressure : 1.0 MPa Hyd.
Gun Metal Wheel Valves
Product Description
Product Standard : IS-778:1971
Pressure/Class/Rating : Class-3
Body Material cum Standard : GM (IS:318 Gr.LTB2)
Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem
Type of Seat : Integral seat
Type of Wedge : Solid wedge
Trim : Cu-Alloy
Gland Packing : Asbestos/Hemp & Jute
End Details : Screwed female threads to IS:554 Parallel
Testing & Certification
Body Test Pressure : 50 Kg/cm²g Hyd.
Seat & Back Seat Test Pressure : 40 Kg/cm²g Hyd.